Rustup changelog

Changelog History

Page 1

• v1.22.1

  July 08, 2020

  A regression in proxied behaviour slipped in due to a non-compatible change in url slipping in in 2.1 which caused a misbehaviour in env_proxy. 🚀 which was fixed but not released to crates.io until after 1.22.0 was built.

  Fortunately, inejge noticed and provided a fix for us by publishing a new env_proxy and providing us with this fix.

  We apologise for any inconvenience this caused.

  🔄 Changed

  • ⚡️ Update to env_proxy 0.4.1 - #2399
  • 🛠 Fixed website copy button and copy space overflow - #2398

  Thanks

  • Ivan Nejgebauer
  • Ben Chen

• v1.22.0

  June 30, 2020

  ♻️ Alongside a significant amount of internal refactoring and code updates, 🚀 the highlights of this release include:

  • 🚀 We have switched to Github Actions to make our CI and release process more consistent.
  • We've invested time in the flow when you reinstall rustup atop an existing installation.
  • We've doubled down on discouraging the use of the internal-development-focussed complete profile. Please use default or minimal unless you're trying to test/develop the Rust tooling itself.
  • We've made a number of subtle quality-of-life improvements around the CLI.
  • ➕ Added a (provisionally unofficial) snap of rustup
  • We've worked hard to improve a lot of the messages (error and informational) in the tool.
  • We've increased internal timeouts and retries in an attempt to improve the situation for McAfee users.
  • While it's not a change, we've documented that rust-toolchain must be UTF8 encoded.

  While the changes spanned around 90 individual pull requests, here are the main changes and additions…

  🔄 Changed

  • 🛠 Fixed various links to our repo and to the forge - #2173
  • 👌 Improved OS detection (particularly darwin) in rustup-init.sh - #2042
  • 🛠 Fixed bug where i686 installer on x86_64 windows would intend to install 64-bit but would actually install 32-bit toolchains by default. - #2186
  • Increased width of copy box on rustup website - #2208
  • When updating a toolchain, indicate the version you updated from as well. - #2152
  • ⚡️ When installing atop an existing rustup installation, we will now update the installed default toolchain, particularly we'll also try and install any additional targets or components specified - #2201 and #2339
  • 🛠 Fixed issue where rustup doc wouldn't work with custom toolchains - #2235
  • In low-memory situations, attempt to unpack more conservatively - #2236
  • 👌 Improved consistency in where rustup will auto-install a toolchain on use. - #2252
  • Try to force strong cipher suites in rustup-init.sh - #2287
  • When skipping a nightly indicate all the missing components - #2316
  • ⏱ Increase timeout for rename retries - #2348
  • Increased 'sanity limit' to account for MIPS binary size increases - #2363
  • Fallback to non-threaded installation pathway on 1-CPU systems to improve chance that installation will succeed on Raspberry Pi - #2372

  ➕ Added

  • It is now possible to install rustup even when there's an existing rustup.sh installation, and we can install alongside rustc or cargo without necessarily forcing via -y by means of the RUSTUP_INIT_SKIP_EXISTENCE_CHECKS environment variable. - #2214
  • Added the concept of a fallback settings file which will allow snaps, distro packages, etc. to provide a default toolchain for users who have not passed through the rustup-init managed one-time question set. - #2244
  • You can now specify multiple components in a single argument in the form --component rls,rust-analysis,rust-src when installing toolchains - #2239
  • It is now possible to snap install --classic rustup in theory (channel details may take some time to settle) - #1898
  • ➕ Added indication of why overrides are happening when running rustup show - #2312
  • ➕ Added riscv64gc-unknown-linux-gnu support (note: There is still work to be done on the compiler etc before this will necessarily work) - #2313

  Thanks

  • Alejandro Martinez Ruiz
  • Alexander D'hoore
  • Ben Chen
  • Chris Denton
  • Daniel Silverstone
  • Evan Weiler
  • Guillaume Gomez
  • Harry Sarson
  • Jacob Lifshay
  • James Yang
  • Joel Parker Henderson
  • John Titor
  • Jonas Platte
  • Josh Stone
  • Jubilee
  • Kellda
  • LeSeulArtichaut
  • Linus Färnstrand
  • LitoMore
  • LIU An (劉安)
  • Luciano Bestia
  • Lzu Tao
  • Manish Goregaokar
  • Mingye Wang
  • Montgomery Edwards
  • Per Lundberg
  • Pietro Albini
  • Robert Collins
  • Rudolf B.
  • Solomon Ucko
  • Stein Somers
  • Tetsuharu Ohzeki
  • Tom Eccles
  • Trevor Arjeski
  • Tshepang Lekhonkhobe

• v1.21.1

  December 19, 2019

  ⚡️ A panic occurred if a rustup update was run with nothing to update and the download directory was missing. This was harmless but could have confused some 👷 automation jobs.

• v1.21.0

  December 19, 2019

  🚀 In release 1.20.x profiles could incorrectly ascribe host-independent components to the host architecture, resulting in surprising behaviour with rust-src. We have corrected this and added mitigations which should 🚀 mean that as of this release, such incorrect ascriptions are supported and also ⚡️ automatically corrected on toolchain update.

  Due to the large number of confusions around the complete profile, we have ⚠ introduced a warning if you use it. It's really only meant for developers of Rust, or those exploring particular issues in nightly.

  There are also a large number of other changes, the highlights of which are below. 🚀 Thanks to everyone who helped work on this release. Even if your changes are not listed below, they are still greatly appreciated.

  🔄 Changed

  • ⚡️ Download directory is cleaned up after successful full update.
  • Bad .partial downloads will be cleaned up for you
  • Force installation of toolchain if install is automatic
  • Switch to darker colours to improve terminal readability
  • 0️⃣ Attempt to be less surprising wrt. default-host during installation
  • rustup toolchain list --verbose now correctly shows the paths
  • ⚡️ Fallback environment for non-cargo toolchains updated to match rustc
  • Made human-readable units slightly more comprehensible
  • Improved detection of armhf userland on aarch64 kernels
  • Improved error message when rustc is detected on installation

  ➕ Added

  • 👍 Added --profile support to rustup toolchain install
  • 👍 Added +toolchain support to rustup itself to match proxy functionality
  • Added ability to rustup component add component-architecture
  • 📄 Added clear report when rustup doc is run without rust-docs available
  • 👍 Added keyword:, primitive:, and macro: prefix support to rustup doc FOO
  • Added retry logic so that rustup will try and repeat interrupted downloads
  • ⬇️ Added --allow-downgrade support to rustup toolchain install
  • ⬆️ Added display of previous version when upgrading channels
  • 👍 Added support for local non-channel toolchains in rust-toolchain file

  Thanks

  • Roman Frołow
  • Jean Simard
  • Lzu Tao
  • Benjamin Chen
  • Daniel Silverstone
  • Jon Hoo
  • Carlo Abelli
  • Filip Demski
  • Chris Tomlinson
  • Kane Green
  • Ralf Jung
  • Yves Dorfsman
  • Rudolf B
  • Pietro Albini
  • Takayuki Nakata
  • Justus K
  • Gilbert Röhrbein
  • Friedel Ziegelmayer
  • Robbie Clarken
  • Tetsuharu OHZEKI

• v1.20.2

  October 16, 2019

  One final tweak was needed to the force-installation of toolchains because otherwise components would be marked as installed when they were not.

  🚀 Our apologies to anyone adversely affected by the 1.20.0/1 releases.

• v1.20.1

  October 16, 2019

  🚀 This release was made to solve two problems spotted in 1.20.0

  • 👮 Force installation of toolchain during rustup-init to improve handling on non-tier-one platforms
  • 🔧 Assume the default profile if a profile is missing from configuration which will solve a problem where distro-provided rustup binaries did not upgrade the configuration properly

• v1.20.0

  October 15, 2019

  🔄 Changed

  • 👍 Toolchain listing now supports a verbose mode
  • Improve zsh completions for cargo
  • ⚡️ Updates/Installations of nightly now backtrack
  • 🏁 Improve handling of Ctrl+C on Windows
  • 👍 rustup which now supports --toolchain

  ➕ Added

  • Added installation profiles
  • Added rustup check
  • 👍 Support for --quiet in most places
  • 👍 Support for adding components and targets during toolchain install

  Thanks

  • Nick Cameron
  • Andy McCaffrey
  • Pietro Albini
  • Benjamin Chen
  • Artem Borisovskiy
  • Jon Gjengset
  • Lzu Tao
  • Daniel Silverstone
  • PicoJr
  • Mitchell Hynes
  • Matt Kantor

• v1.19.0

  September 09, 2019

  🔄 Changed

  • Fix race condition with some virus scanners
  • 💻 UI improvements for race condition fix
  • Improve home mismatch explanation
  • Enable fully threaded IO for installs
  • Improve look of rustup homepage
  • ⚡️ Improve messaging if shell profile cannot be updated
  • Improve messaging around directory names during install
  • Disregard unavailable targets
  • 0️⃣ No longer provide non-panic backtraces by default

  ➕ Added

  • 👍 Add support for rustup target add all
  • Add rustup show home
  • Add NetBSD target to CI
  • Add x86_64 musl to CI

  Thanks

  • Lzu Tao
  • Gonzalo Brito Gadeschi
  • Paul Oppenheimer
  • Robert Collins
  • KennyTM
  • Daniel Silverstone
  • Nicholas Parker
  • Caleb Cartwright
  • Josh Holland
  • Charlie Saunders
  • Wesley Van Melle
  • Jason Cooke
  • CrLF0710
  • Brian Anderson
  • Bryan Dady
  • Fisher Darling
  • Bjorn3
  • Iku Iwasa

• v1.18.3

  May 22, 2019

  🔄 Changed

  • 🐎 Improve performance by only opening terminfo once
  • Use same webpage opening logic as cargo
  • Report download duration on completion
  • Reduce stat() usage in unpacking
  • Buffer reads from tarfile during unpacking
  • Buffer for hashing of dist content
  • Don't set mtime on unpacked toolchain files
  • 💻 UI consistency/improvement in download speeds
  • Avoid blocking on CloseHandle

  ➕ Added

  • Suggest possible components or targets if misspelled

  Thanks

  • Robert Collins (who has tirelessly worked to improve the performance of Rustup, particularly on Windows)
  • Lucien Greathouse
  • Filip Demski
  • Peter Hrvola
  • Bogdan Kulbida
  • Srinivas Reddy Thatiparthy
  • Sunjay Varma
  • Lzu Tao (behind the scenes, lots of housekeeping and CI)

• v1.18.2

  May 02, 2019

  🔄 Changed

  • Fix local bash-completion directory path
  • Handle stray toolchain hashes during install
  • ⚡️ Update to env_proxy 0.3.1
  • 🚀 Improvements to release process around Windows versions

  ➕ Added

  • 👍 Support listing installed targets only
  • 👷 Added CI of CentOS 6 support for rustup-init.sh
  • ⚡️ FAQ entry about not being able to update rustup on Windows

  Thanks

  🚀 This release was made, in part, thanks to:

  • Brian Ericson
  • Onat Mercan
  • Lzu Tao
  • Takuto Ikuta
  • Jason Williams
  • Filip Demski
  • Michael Maclean
  • Daniel Silverstone

• 1
• 2
• 3
• 4
• 5
• Next ›
• Last »